dnutiu/NucuCar
dnutiu/NucuCar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Update NucuCar.Sensors Readme.md

Browse source
This commit is contained in:
Denis-Cosmin Nutiu 2020-11-25 21:03:53 +02:00
parent 9ad323e755
commit 454535b04b
1 changed files with 13 additions and 14 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

25
NucuCar.Sensors/Readme.md
View file

@ -1,17 +1,15 @@
This application will read sensors data periodically,
provide access to it via gRPC and publish telemetry to the cloud.
# Introduction
## Installation How-To
This module will read sensors data periodically and
provide access to it via gRPC, while optionally publishing telemetry data into the cloud.
1. Build the module and target the Raspberry Pi.
2. Copy the files over to the Raspberry Pi.
3. Modify `appsettings.json` to fit your needs.
4. Install the hardware.
For installing see instructions from the Readme.md file located at the root directory.
### Wiring
# Wiring
You may download the Fritzing diagram from `Docs/fritzing/nucucar.sensors.fzz`
in order to play with it.
_You may download the Fritzing diagrams from `Docs/fritzing/` in order to play with them._
Wire your sensor according to the following diagram:
![alt text](../Docs/images/nucucar.sensors_bb.jpg)
@ -21,12 +19,13 @@ in order to play with it.
Connect the BME680 sensor to the I2C bus 1 (I2C.1) of the Raspberry Pi.
The address ` 0x76` will be used to communicate with the sensor.
Make sure I2C is enabled. Use `raspi-config`.
5\. Run the application.
# Sensors
### Environment Sensor
#### Environment Sensor
Worker service for the [BME680](https://www.bosch-sensortec.com/bst/products/all_products/bme680) environmental sensor from Bosh.
We use [BME680](https://www.bosch-sensortec.com/bst/products/all_products/bme680) environmental sensor from Bosh.
Sensor capabilities: