Update NucuCar.Sensors Readme.md

This commit is contained in:
Denis-Cosmin Nutiu 2020-11-25 21:03:53 +02:00
parent 9ad323e755
commit 454535b04b

View file

@ -1,17 +1,15 @@
This application will read sensors data periodically, # Introduction
provide access to it via gRPC and publish telemetry to the cloud.
## Installation How-To This module will read sensors data periodically and
provide access to it via gRPC, while optionally publishing telemetry data into the cloud.
1. Build the module and target the Raspberry Pi. For installing see instructions from the Readme.md file located at the root directory.
2. Copy the files over to the Raspberry Pi.
3. Modify `appsettings.json` to fit your needs.
4. Install the hardware.
### Wiring # Wiring
You may download the Fritzing diagram from `Docs/fritzing/nucucar.sensors.fzz` _You may download the Fritzing diagrams from `Docs/fritzing/` in order to play with them._
in order to play with it.
Wire your sensor according to the following diagram:
![alt text](../Docs/images/nucucar.sensors_bb.jpg) ![alt text](../Docs/images/nucucar.sensors_bb.jpg)
@ -20,13 +18,14 @@ in order to play with it.
Connect the BME680 sensor to the I2C bus 1 (I2C.1) of the Raspberry Pi. Connect the BME680 sensor to the I2C bus 1 (I2C.1) of the Raspberry Pi.
The address ` 0x76` will be used to communicate with the sensor. The address ` 0x76` will be used to communicate with the sensor.
5\. Run the application. Make sure I2C is enabled. Use `raspi-config`.
### Environment Sensor # Sensors
Worker service for the [BME680](https://www.bosch-sensortec.com/bst/products/all_products/bme680) environmental sensor from Bosh. #### Environment Sensor
We use [BME680](https://www.bosch-sensortec.com/bst/products/all_products/bme680) environmental sensor from Bosh.
Sensor capabilities: Sensor capabilities: