57 lines
2 KiB
Rust
57 lines
2 KiB
Rust
#![no_std]
|
|
|
|
use bme680::*;
|
|
use core::result;
|
|
use core::time::Duration;
|
|
use embedded_hal::blocking::delay::DelayMs;
|
|
use embedded_hal::blocking::i2c;
|
|
use linux_embedded_hal as hal;
|
|
use linux_embedded_hal::Delay;
|
|
use log::info;
|
|
|
|
fn main(
|
|
) -> result::Result<(), Error<<hal::I2cdev as i2c::Read>::Error, <hal::I2cdev as i2c::Write>::Error>>
|
|
{
|
|
env_logger::init();
|
|
|
|
let i2c = hal::I2cdev::new("/dev/i2c-1").unwrap();
|
|
let mut delayer = Delay {};
|
|
|
|
let mut dev = Bme680::init(i2c, &mut delayer, I2CAddress::Primary)?;
|
|
let mut delay = Delay {};
|
|
|
|
let settings = SettingsBuilder::new()
|
|
.with_humidity_oversampling(OversamplingSetting::OS2x)
|
|
.with_pressure_oversampling(OversamplingSetting::OS4x)
|
|
.with_temperature_oversampling(OversamplingSetting::OS8x)
|
|
.with_temperature_filter(IIRFilterSize::Size3)
|
|
.with_gas_measurement(Duration::from_millis(1500), 320, 25)
|
|
.with_temperature_offset(-2.2)
|
|
.with_run_gas(true)
|
|
.build();
|
|
|
|
let profile_dur = dev.get_profile_dur(&settings.0)?;
|
|
info!("Profile duration {:?}", profile_dur);
|
|
info!("Setting sensor settings");
|
|
dev.set_sensor_settings(&mut delayer, settings)?;
|
|
info!("Setting forced power modes");
|
|
dev.set_sensor_mode(&mut delayer, PowerMode::ForcedMode)?;
|
|
|
|
let sensor_settings = dev.get_sensor_settings(settings.1);
|
|
info!("Sensor settings: {:?}", sensor_settings);
|
|
|
|
loop {
|
|
delay.delay_ms(5000u32);
|
|
let power_mode = dev.get_sensor_mode();
|
|
info!("Sensor power mode: {:?}", power_mode);
|
|
info!("Setting forced power modes");
|
|
dev.set_sensor_mode(&mut delayer, PowerMode::ForcedMode)?;
|
|
info!("Retrieving sensor data");
|
|
let (data, _state) = dev.get_sensor_data(&mut delayer)?;
|
|
info!("Sensor Data {:?}", data);
|
|
info!("Temperature {}°C", data.temperature_celsius());
|
|
info!("Pressure {}hPa", data.pressure_hpa());
|
|
info!("Humidity {}%", data.humidity_percent());
|
|
info!("Gas Resistence {}Ω", data.gas_resistance_ohm());
|
|
}
|
|
}
|