diff --git a/src/lib.rs b/src/lib.rs
index 80eb575..5021c35 100644
--- a/src/lib.rs
+++ b/src/lib.rs
@@ -5,82 +5,6 @@
 //! In the examples you can find a demo how to use the library in Linux using the linux-embedded-hal crate (e.g. on a RPI).
 //! ```no_run
 
-//! extern crate bme680;
-//! extern crate embedded_hal;
-//! // Note that you'll have to import your board crates types corresponding to
-//! // Delay and I2cdev.
-//!
-//! use bme680::*;
-//! use embedded_hal::blocking::i2c;
-//! use hal::*;
-//! use std::result;
-//! use std::time::Duration;
-//! use std::thread::sleep;
-//!
-//! # mod hal {
-//! #   use super::*;
-//! #   use embedded_hal::blocking::delay;
-//! #
-//! #   #[derive(Debug)]
-//! #   pub struct Delay {}
-//! #
-//! #   impl delay::DelayMs<u8> for Delay {
-//! #       fn delay_ms(&mut self, _ms: u8) {}
-//! #   }
-//! #
-//! #   #[derive(Debug)]
-//! #   pub enum I2CError {}
-//! #
-//! #   pub struct I2cdev {}
-//! #
-//! #   impl i2c::Write for I2cdev {
-//! #       type Error = I2CError;
-//! #
-//! #       fn write<'w>(&mut self, addr: u8, bytes: &'w [u8]) -> result::Result<(), Self::Error> {
-//! #           Ok(())
-//! #       }
-//! #   }
-//! #
-//! #   impl i2c::Read for I2cdev {
-//! #       type Error = I2CError;
-//! #
-//! #       fn read<'w>(&mut self, addr: u8, bytes: &'w mut [u8]) -> result::Result<(), Self::Error> {
-//! #           Ok(())
-//! #       }
-//! #   }
-//! # }
-//!
-//! fn main() -> result::Result<(), Error<<hal::I2cdev as i2c::Read>::Error, <hal::I2cdev as i2c::Write>::Error>>
-//! {
-//!     // Initialize device
-//!     let i2c = I2cdev {};        // Your I2C device construction will look different, perhaps using I2cdev::new(..)
-//!     let mut delayer = Delay {}; // Your Delay construction will look different, perhaps using Delay::new(..)
-//!     let mut dev = Bme680::init(i2c, &mut delayer, I2CAddress::Primary)?;
-//!     let settings = SettingsBuilder::new()
-//!         .with_humidity_oversampling(OversamplingSetting::OS2x)
-//!         .with_pressure_oversampling(OversamplingSetting::OS4x)
-//!         .with_temperature_oversampling(OversamplingSetting::OS8x)
-//!         .with_temperature_filter(IIRFilterSize::Size3)
-//!         .with_gas_measurement(Duration::from_millis(1500), 320, 25)
-//!         .with_run_gas(true)
-//!         .build();
-//!     dev.set_sensor_settings(&mut delayer, settings)?;
-//!     let profile_duration = dev.get_profile_dur(&settings.0)?;
-//!
-//!     // Read sensor data
-//!     dev.set_sensor_mode(&mut delayer, PowerMode::ForcedMode)?;
-//!     sleep(profile_duration);
-//!     let (data, _state) = dev.get_sensor_data(&mut delayer)?;
-//!
-//!     println!("Temperature {}°C", data.temperature_celsius());
-//!     println!("Pressure {}hPa", data.pressure_hpa());
-//!     println!("Humidity {}%", data.humidity_percent());
-//!     println!("Gas Resistence {}Ω", data.gas_resistance_ohm());
-//!
-//!     Ok(())
-//! }
-//! ```
-
 #![no_std]
 #![forbid(unsafe_code)]