diff --git a/Docs/fritzing/nucucar.sensors.fzz b/Docs/fritzing/nucucar.sensors.fzz
new file mode 100644
index 0000000..49f72ab
Binary files /dev/null and b/Docs/fritzing/nucucar.sensors.fzz differ
diff --git a/Docs/images/nucucar.sensors_bb.jpg b/Docs/images/nucucar.sensors_bb.jpg
new file mode 100644
index 0000000..a01e3b8
Binary files /dev/null and b/Docs/images/nucucar.sensors_bb.jpg differ
diff --git a/NucuCar.Sensors/Readme.md b/NucuCar.Sensors/Readme.md
index 9ee8a50..238489a 100644
--- a/NucuCar.Sensors/Readme.md
+++ b/NucuCar.Sensors/Readme.md
@@ -8,19 +8,19 @@ provide access to it via gRPC and publish telemetry to the cloud.
 3. Modify `appsettings.json` to fit your needs.
 4. Install the hardware.
 
+### Wiring
+
+You may download the Fritzing diagram from `Docs/fritzing/nucucar.sensors.fzz` 
+in order to play with it.
+
+![alt text](../Docs/images/nucucar.sensors_bb.jpg)
+
+
 #### BME680
 
 Connect the BME680 sensor to the I2C bus 1 (I2C.1) of the Raspberry Pi. 
 The address ` 0x76` will be used to communicate with the sensor.
  
- I2C Data: https://pinout.xyz/pinout/pin3_gpio2
- 
- I2C Clock: https://pinout.xyz/pinout/pin5_gpio3
- 
- 3.3V Power: https://pinout.xyz/pinout/pin1_3v3_power
- 
- Ground: https://pinout.xyz/pinout/ground
-
 
 5\. Run the application.